Wolf Repair Woodinville, WA

Hood · Parts

Wolf Baffle Filter

Stainless range hood with the lower panel off exposing the blower wheel, baffle filters on the counter

Its job

  • Forces rising exhaust to zigzag between angled stainless channels, so grease strikes the metal and stays there while the air carries on.
  • Lets the grease it catches run down to its lower edge, where some Wolf hoods carry small grease cups.
  • Guards the blower and the inside of the hood, which is why Wolf says never to run the hood with its filters out.

Signs it is going

  • Clogs with grease until air struggles through, and the hood turns loud and weak on every setting.
  • Gets bent or dropped, then sits crooked in its slot and leaves a gap for grease to slip past.
  • Goes back in the wrong order and will not seat; on older hoods the outer filters have to be eased aside to let the middle one in.
  • Leaves full grease cups to overflow, and drips along the front edge can be taken for a leak.

Our order of work

  • Take out the filters and grease cups whenever the hood is open for another job, and check the slots they sit in.
  • Straighten a filter that will not seat, or order a genuine replacement matched to the hood's rating plate.
  • Clear grease that has already got past the filters off the blower wheel and housing, where Wolf says it must not build up.

How often

Wolf’s how-to page says roughly monthly, and more often in a kitchen that fries or cooks with a wok; its latest pro hood guide stretches that to three to six months. The detail sits under how often to clean Wolf baffle filters.

Downdrafts use mesh, not baffles

A Wolf downdraft carries aluminium mesh filters behind stainless covers instead. Both go in the dishwasher, and a FILTER light on the control module says when they are due.

When washing changes nothing

If a freshly washed set leaves the hood just as loud on high, the restriction sits further along: the damper, the duct or the blower itself.

Two-Minute Check

Run it in order. Nothing here needs a panel off, a ladder or a wire touched.

  1. Turn the blower and lights off, let the underside cool, and wear gloves — the filter edges can cut.
  2. Lift each filter up along its angle and let the bottom swing down; on older hoods the middle one has to come out before the rest.
  3. Wipe the worst of the grease off with paper towel, empty any grease cups, then put filters and cups through the dishwasher.
  4. Once everything is dry, refit the grease cups before the filters, and switch on only when every filter sits flush.
  5. Stop here — call Wolf Repair Woodinville, (425) 585-2373. Call (425) 585-2373
Checked byRafael MonteiroRoleCooking-appliance technician — ventilation and blowersIn the trade9 yearsChecked

Woodinville, WA

Want the part confirmed before anyone orders it? Call first.

Out on calls 8:00 am – 8:00 pm, seven days. (425) 585-2373 is picked up 24/7. $89 to come out, and that comes off the bill if you go ahead.